Marks come from the model
Tekla numbering gives identical assemblies the same assembly mark (e.g. RF-1) and identical parts the same part mark. A mark therefore describes a type of piece, not a single physical piece: RF-1 may exist 12 times.
Every physical piece gets a serial
For production, packing and erection, PEB Studio tracks each physical piece separately. Labels read Item n / N – piece 3 of the 12 RF-1 – so a scan always points to one piece, never to “some RF-1”.
Physical Component ID and position
Smart Erection gives every physical component a Physical Component ID (PC00001…) and a QR ID, generated from the IFC and stable across model revisions. The PCID links the piece to its position (grid, elevation, zone, step), its package and container, and its inspections.
Where each identity is used
| Identity | Where you see it |
|---|---|
| Assembly / part mark | BOM, drawings, cutting plans, weld register |
| Serial (Item n / N) | Production labels, QR confirmation, packing |
| PCID / QR ID | Component register, passport, navigator, handover |
| GUID | IFC instance, position in the model |
What a QR code contains
Only the project, the type, the reference and an HMAC signature – no password, token or data. Access is decided by the server at each scan, so a photographed label exposes nothing and a forged code is rejected.
另请参阅
引用此页的内容
更新于 01 Nov 2026