CodeISO 5817Issued byISOFieldWeld acceptance
What it covers
- Limits for surface and internal imperfections of arc-welded joints in steel.
- Applies to butt and fillet welds over a range of thicknesses.
Key points for fabricators
- EN 1090-2 links the required quality level to the execution class (typically C for EXC2 and B for EXC3, with additional requirements).
- Inspectors record the imperfection type and the level it was judged against.
How PEB Studio supports it
Inspection steps can name ISO 5817 as the acceptance standard; a FAIL records the defect (porosity, undercut, dimensional deviation…) and its disposition, and re-inspections are kept as #2, #3…
This page is a summary for orientation. Always work from the edition of the standard named in the project specification.
Zie ook
Waar PEB Studio het toepast
Was deze pagina nuttig?
Bedankt voor uw feedback!
Bijgewerkt op 01 Nov 2026