Known limits

Weld sizes are not contained in the IFC – they come from the drawings. Weld consumable factors are references confirmed by the welding engineer.
Container data (tare, maximum gross mass) are typical values until confirmed from the CSC plate; the VGM signatory is responsible for the VGM.
The loading plan, the Ready for erection status and the erection simulation support planning – they do not replace the method statement, the safety assessment or a lashing certificate.
The DXF for cutting does not carry cutting sequence, lead-ins or kerf compensation; splice positions must be approved by the designer.
Internal electronic signatures are logged but are not certified digital signatures (e.g. under Vietnam's Law on Electronic Transactions 2023) unless a certification service is used.
Built-in translations of labels should be reviewed by a native speaker; AI translations must be approved before they reach a client.
Arabic (right-to-left) PDFs are not supported yet – use Excel or the online view. HEVC videos may need to be downloaded to play in older browsers.
Demo data is labelled DEMO and must be removed before going live.

另请参阅