지원 센터
무엇을 도와드릴까요?
단계별 가이드, 모든 기능 설명, 철강 산업 지식, 표준과 PEB Studio 위키를 귀하의 언어로.
단계별 가이드
번호가 매겨진 단계에 따라 작업을 처음부터 끝까지 수행합니다.
가이드 13개
기능 참조 A–J
PEB Studio의 모든 기능: 누가 쓰는지, 왜 중요한지, 무엇을 하는지, 한계는 무엇인지.
기능 74개
철강 산업 지식
PEB 건물, 형강, 강종, 용접, 도장, 운송, 설치.
문서 13개
표준 라이브러리
EN 1090, ISO 3834, AWS D1.1, ISO 6346, SOLAS VGM… 그리고 PEB Studio가 이를 적용하는 곳.
표준 26개
PEB Studio 위키
소프트웨어의 사고방식: 식별, 상태, 역할, 데이터 규칙, 형식, FAQ.
페이지 12개 · 용어 66개
기능
모든 기능 모듈별로 소프트웨어 둘러보기
APlatform & system administration기능 6개
BTekla IFC model analysis & BOM기능 9개
COptimised cutting plans & material requisition기능 4개
DProject information, sharing & categories기능 4개
EProduction reporting, labels & QR traceability기능 6개
FProduction · QA/QC & traceability (MES)기능 13개
GWeld management & project benchmarking기능 6개
HPacking, packing lists & containers기능 13개
ISmart Erection – on-site erection management기능 10개
JSecurity, data & general principles기능 3개
철골 지식
모두 보기 업계 배우기
Execution classes, ITPs and hold points
EXC1–EXC4 in EN 1090-2, CC1–CC4 in AS/NZS 5131 and ISO 3834 quality levels: what they demand from the shop, and how inspection and test plans with hold and witness point…
Shipping structural steel in containers
Which container fits which members, payload and centre of gravity, securing and dunnage, VGM, seals and the document set the client expects.
The steel fabrication process, step by step
How a structural member travels from the detailing model to the container: numbering, drawings, cutting, drilling, fit-up, welding, inspection, blasting, painting, packi…
Steel grades and mill certificates (EN 10204 3.1)
How to read S355JR, A572 Gr 50, SS400 or Q355B, how grades compare across standards, and what a 3.1 inspection certificate proves.
표준
모두 보기 따르는 표준
EN 1090-2 ISO 3834 ISO 5817 EN 10204 ISO 6346 SOLAS VI/2 (VGM) AS/NZS 5131 AWS D1.1 AS/NZS 1554.1 ISO 9606-1 ISO 15614-1 ISO 4063
위키
용어집 A–Z 핵심 개념
- PEB Studio in one page: modules and data flowPEB Studio reads the IFC from Tekla Structures and manages the whole life of every steel member: BOM, cutting…
- Component identity: mark, serial, PCID and QRHow PEB Studio tells pieces apart: assembly and part marks from Tekla, a serial for each physical piece (Item…
- Production statuses, hold points and NCR flowCompleted is not the same as QC passed. How a component moves through its stages, when it waits for QC, and h…
- Roles and permissions: who uses whatDepartments, positions and project roles, how permissions are combined, and which features each department us…
- Frequently asked questionsShort answers to the questions new users ask most: models, numbering, welds, permissions, QR codes, languages…
아직 도움이 필요하신가요?
제품 전문가가 귀하의 언어로, 보통 4 영업시간 이내에 답변드립니다.