F.8 QA/QC workflow, inspection queue & workshop NCR

QC works from a queue and inspects to the right standard (ISO 5817, AWS D1.1, AS/NZS 1554.1, EN 1090-2); every FAIL is kept as evidence. An NCR follows the flow OPEN → CORRECTIVE ACTION → RE-INSPECTION → CLOSED, and only QC can close it.

What it does

Inspection step: required / optional / sampling %, hold / witness / review, standard, measurements (min / max), mandatory photos / documents, ITP.
PASS / FAIL with defect (porosity, undercut, dimensional deviation…) and disposition (redo, repair, accept with approval, reject); a waiver requires a reason and an approver.
Re-inspection #2, #3… after repair; full history on the component page.

Xem thêm

Trang này có hữu ích không?

Cập nhật 01 Nov 2026

Vẫn cần trợ giúp?

Chuyên gia sản phẩm trả lời bằng ngôn ngữ của bạn, thường trong vòng 4 giờ làm việc.

Liên hệ hỗ trợ